The PT Boat Forum
http://www.ptboatforum.com/cgi-bin/MB2/netboard.cgi
» Forum Category: PT Boats of WWII
http://www.ptboatforum.com/cgi-bin/MB2/netboard.cgi?cid=101&fct=showf
» Forum Name: PT Boats - General
http://www.ptboatforum.com/cgi-bin/MB2/netboard.cgi?fct=gotoforum&cid=101&fid=102
» Topic:
New Motor In My Old 1/32 Scale PT Boat
http://www.ptboatforum.com/cgi-bin/MB2/netboardr.cgi?cid=101&fid=102&tid=918
Ahoy there mateys!
As well as building my current 1/32 scale Lindberg PT boat I have been doing a bit of repair and re-fiiting on/in my 20+ years old 1/32 scale Lindberg PT boat.
I had originally installed three inexpensive hobby motors in it. It wasn't fast but it runs for a couple of hours on a 3300 NiMH 7.2 volt battery.
Well, I have decided to mount a 400 Speed Motor (not brushless) to drive the middle prop. Has any one here ever run just a single 400 size motor in one of these boats? If so what was your speed and run-time like?
I was going to run it at the local pond this evening but it is now thundering and lightning and I do not want to have an extremely shocking experience there. When I do run it I'll let you know how it goes.
Cheers again and thanks from PeterTareBuilder
"Give me a faster PT boat for I'd like to get out of harm's way!"
Posted By: PeterTareBuilder | Posted on: Jul 30, 2008 - 4:23pm
Total Posts: 494 | Joined: Jun 24, 2008 - 5:59pm