The PT Boat Forum
http://www.ptboatforum.com/cgi-bin/MB2/netboard.cgi
» Forum Category: PT Boats of WWII
http://www.ptboatforum.com/cgi-bin/MB2/netboard.cgi?cid=101&fct=showf
» Forum Name: PT Boats - General
http://www.ptboatforum.com/cgi-bin/MB2/netboard.cgi?fct=gotoforum&cid=101&fid=102
» Topic:
franks mosquito boat hobbies
http://www.ptboatforum.com/cgi-bin/MB2/netboardr.cgi?cid=101&fid=102&tid=2203
Hello
Has any of the modelers in the forum had any experience with Frank's fittings he supplies? I would like to find out if they are good quality.
Thanks
Andrew
New Zealand
Posted By: AndrewB | Posted on: May 24, 2011 - 5:03am
Total Posts: | Joined: Unregistered
Great stuff
Posted By: Browndog | Posted on: May 26, 2011 - 3:55am
Total Posts: 46 | Joined: Nov 17, 2009 - 5:37pm
Correct me if I am wrong, but don't they use HR PRODUCTS in some of the larger scale weapons.
Posted By: Frank J Andruss Sr | Posted on: May 26, 2011 - 12:10pm
Total Posts: 3497 | Joined: Oct 9, 2006 - 6:09am
I talked to Frank a short while ago ,he is trying to do some of his own in 1/20
Posted By: Browndog | Posted on: May 26, 2011 - 3:27pm
Total Posts: 46 | Joined: Nov 17, 2009 - 5:37pm
It must depend upon which scale your are referencing. I have a set of his 1/16th fiitings for an Elco and most of the fittingsd are cast resin and very well done. A few pieces are white metal, mostly barrels, and the deck lights are photo-etch.
Hope this helps.
Jonathan
Posted By: Jonathan Eno | Posted on: May 26, 2011 - 5:31pm
Total Posts: | Joined: Unregistered