The PT Boat Forum
http://www.ptboatforum.com/cgi-bin/MB2/netboard.cgi
» Forum Category: PT Boats of WWII
http://www.ptboatforum.com/cgi-bin/MB2/netboard.cgi?cid=101&fct=showf
» Forum Name: PT Boats - General
http://www.ptboatforum.com/cgi-bin/MB2/netboard.cgi?fct=gotoforum&cid=101&fid=102
» Topic:
PARTS NEEDED
http://www.ptboatforum.com/cgi-bin/MB2/netboardr.cgi?cid=101&fid=102&tid=2120
Hey guys, STAN is looking to have some items for our PT-10 Project made. He can send sizes and drawings as I'm not sure what he is referring to..............
Posted By: Frank J Andruss Sr | Posted on: Mar 9, 2011 - 9:26pm
Total Posts: 3497 | Joined: Oct 9, 2006 - 6:09am
and those parts are???
Al
Posted By: alross2 | Posted on: Mar 10, 2011 - 2:46am
Total Posts: 993 | Joined: Oct 30, 2006 - 8:19pm
From what Stan is asking me he wants to know about photo etched parts for our 1/32 PT-10 build. He wants to know if anyone makes dead light frames, and wants framing around the cabin trunk windows, as well as latches and or hinges. Of course he can build anything, but some of the small parts would make his life easier............Also a wheel for the Helm and possibly horn and light set up.
Posted By: Frank J Andruss Sr | Posted on: Mar 10, 2011 - 5:26am
Total Posts: 3497 | Joined: Oct 9, 2006 - 6:09am
Years ago, I used to sell a large fret of PE in 1/32 that included deck lights, roll-off rack components, fuel fills, etc, for the 80' boat. I'll see if I still have any useful pieces left. I've used styrene strips to shape the cockpit windows in several 77' boats over the years. Once the basic shape of the window is cut out, the styrene forms natural curves when bent around the inside of the cutout.
Al
Posted By: alross2 | Posted on: Mar 10, 2011 - 6:02am
Total Posts: 993 | Joined: Oct 30, 2006 - 8:19pm
Frank and Al:
Where could I order some crewmen for my 1/35 Itareri PT 596 model?
C. J. Willis
Posted By: CJ Willis | Posted on: Mar 10, 2011 - 12:59pm
Total Posts: 464 | Joined: Nov 5, 2006 - 5:02pm
Frank and Al:
Where could I order some crewmen for my 1/35 Itareri PT 596 model?
C. J. Willis
Go here: [url]http://www.squadron.com/SearchResults.asp?offset=0[/url]
Al
Posted By: alross2 | Posted on: Mar 10, 2011 - 2:41pm
Total Posts: 993 | Joined: Oct 30, 2006 - 8:19pm
Thanks All: They show out of stock for the PT crew right now but I will keep trying. Thanks Again..
C. J. Willis
Posted By: CJ Willis | Posted on: Mar 10, 2011 - 3:11pm
Total Posts: 464 | Joined: Nov 5, 2006 - 5:02pm
C.J.
If you ever go on EBAY, right nw there are no less than 10 Kits available for sale. The cheapest I have seen was $23.00. Check that out and you can buy one right there.
Posted By: Frank J Andruss Sr | Posted on: Mar 10, 2011 - 3:18pm
Total Posts: 3497 | Joined: Oct 9, 2006 - 6:09am