PT Boat Forum


Moderated by: Dick, Jeff D

The PT Boat Forum ª PT Boats of WWII ª  PT Boats - General

Page: 1 of 1

« Back to Topic Index Page 200 | Replies: 6

 Author  Topic: Where to finf photos of H-R Products?
PeterTareBuilder

TOP BOSS
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of PeterTareBuilder  Posted on: Jul 7, 2008 - 8:09pm
Hi there.

Can any one tell me where I can find photos of the various H-R Products PT boat fittings and weapons? I want to order some parts and guns in 1/32 scale but most of the products on the H-R site do not have images only product numbers.

Thanks again from PeterTareBuilder

"Give me a fast ship for I intend to go in harm's way!"

Total Posts: 494 | Joined: Jun 24, 2008 - 5:59pm | IP Logged

Drew Cook

TOP BOSS
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Drew Cook  Posted on: Jul 8, 2008 - 5:58am
PTB,

Over the years, as I've thought about building that 1/32 Lindberg kit stored in my garage, I've wished and wondered the same thing, too.

Many years ago (at least 15), I did see a photo of the H-R Products PT-boat-type twin-.50 caliber guns/mount in 1/32nd scale, I believe in an advertisement in a FINE SCALE MODELER magazine. They looked pretty good, but I have since read they carried a lot of "flash" that has to be cleaned up. I don't think I've ever seen any other illustrations or photos of any other H-R Products items.

There is a British modeling company, I believe called Nautical Marine Models, or something similar, which makes and sells sectional parts in resin and fittings in white metal for a 1/32nd (or 1/35th, which is close enough) scale 80' Elco PT. The larger, sectional resin parts, which are the charthouse/cockpit, the dayroom bulkheads/canopy, the engine room cover/hatch/ventilators/20mm ammo lockers, and depth charges in cradles, would probably fit the Lindberg kit. The white metal fittings are sidelights, chocks, cleats, etc. Checking the exchange rate on their prices, listed in English pounds, reveals they're pretty expensive.


Total Posts: 1306 | Joined: Oct 19, 2006 - 10:44am | IP Logged

muddyfields

Advanced Member
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of muddyfields  Posted on: Jul 8, 2008 - 7:42am
Hi
Yeh when I was building my PT Boat I checked out these guy's. some nice items.
They do list on ebay might be worth a look.

s.symonds

Total Posts: 96 | Joined: Mar 1, 2007 - 7:09am | IP Logged

TGConnelly

New Member
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message   Posted on: Jul 8, 2008 - 7:48am
I would not recommend H-R Products. If I were you sir, I'd google THE FLOATING DRYDOCK and see what other manufacturers have in that scale. H-R castings aren't up to par anymore and they're dreadfully slow in delivery.

Another option is to go to www.ptboatworld.com, click on the links page and click on the company from England that has replacement parts for that kit.

Garth


Total Posts: | Joined: Unregistered | IP Logged

Will Day

TOP BOSS
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Will Day   Send Email To Will Day Posted on: Jul 8, 2008 - 1:06pm
One thing to watch when ordering parts for the Lindberg kit; it is not really molded to a true scale (compare to Al Ross' drawings). Some aftermarket parts will fit better than others.

Will

Total Posts: 1955 | Joined: Oct 8, 2006 - 4:19pm | IP Logged

PeterTareBuilder

TOP BOSS
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of PeterTareBuilder  Posted on: Jul 8, 2008 - 1:48pm
Quote:

PTB,
Snipped:

There is a British modeling company, I believe called Nautical Marine Models, or something similar, which makes and sells sectional parts in resin and fittings in white metal for a 1/32nd (or 1/35th, which is close enough) scale 80' Elco PT. The larger, sectional resin parts, which are the charthouse/cockpit, the dayroom bulkheads/canopy, the engine room cover/hatch/ventilators/20mm ammo lockers, and depth charges in cradles, would probably fit the Lindberg kit. The white metal fittings are sidelights, chocks, cleats, etc. Checking the exchange rate on their prices, listed in English pounds, reveals they're pretty expensive.




========================================================

Hi there.

My budget is very tight.

In military armour there is quite a difference in size between 1/32 and 1/35 scale kits and accessories. A 1/35 scale tank is not compatible with a 1/32 scale model of the same vehicle unless you are attempting a forced perspective.

I have already modified the chart-room and the bridge area.

I think that I will just scratch-build the .fifty caliber gun barrels. I have a number of Tamiya .fifty caliber mgs from their SAS jeep kits. Those guns are actually larger than 1/35 and I can use those receivers. I am only looking for some thing better than the Lindberg .fifty caliber mgs.

Thanks and cheers from PeterTareBuilder


"Give me a faster PT boat for I'd like to get out of harm's way!"

Total Posts: 494 | Joined: Jun 24, 2008 - 5:59pm | IP Logged

TGConnelly

New Member
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message   Posted on: Jul 8, 2008 - 2:47pm
Yes, use the Tamiya stuff ........... try and not use the H-R stuff. They once was good. Now? Vastly out-classed, even by plastic stuff I'm sorry to say.


Total Posts: | Joined: Unregistered | IP Logged


Lock Topic

 

Forum Legend

New Member

Reply to topic

More than 25 posts | Full Member

Reply to topic with quoted message

More than 50 posts | Advanced Member

Edit Message

More than 150 posts | MASTER

View profile

More than 300 posts | TOP BOSS

Email member