PT Boat Forum


Moderated by: Dick, Jeff D

The PT Boat Forum ª PT Boats of WWII ª  PT Boats - General

Next Page » | Page: 1 of 2

« Back to Topic Index Page 33 | Replies: 10 | Pages: [1] 2

 Author  Topic: PT 5 & PT 6
Olli

New Member
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Olli  Posted on: Jun 2, 2016 - 11:55pm

Hello !

I wonder if this finding has any relevancy in the PT 5 & PT 6 matter.

The bids for expeimental 81 ft motor torpedo boats were opened on May 5, 1939 and the contract C 67021 with Higgins Industries made (obviously) on June 10, 1939. In that contract PT 5 and PT 6 were specified as "3 engine" boats. However, a correction was made and "3" heavily and deliberately typed over with "2" making PT 5 seem like two engined boat.

According to the terms of the contract the government was to supply the main engines, contractor the hulls, their fittings, auxiliary equipment and to install main engines. The cost of both hulls was 51 450 dollars. The engine installation (including exhaust/cooling/wiring systems etc) was 7 150 dollars for PT 5 and 9 650 dollars for PT 6, totalling 58 650 and 61 100 dollars.

The cost of installation is so much lower (2 500 dollars) for PT 5 that it is hardly attributable to different engine type. Moreover, PT 6 was to be delivered within 230 days whereas PT within just 175 days.If there was no typing error and costs and schedules were correct, is it possible that the centre engine was to be installed at a later date or the installation left uncompleted for trials of some other type of engine ?

Greetings

Olli-Pekka Haukiala
Helsinki, Finland




Total Posts: 2 | Joined: Jun 2, 2016 - 11:00pm | IP Logged

  Jerry Gilmartin

TOP BOSS
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Jerry Gilmartin   Send Email To Jerry Gilmartin Posted on: Jun 3, 2016 - 2:14am
Hello Olli,
Welcome to the PT Boat Forum. I would suggest you obtain Jerry Strahans book about AJ Higgins biography. He has a lot of behind the scenes details about what they were planning in those early days. Also, I have posted some info about PT5 trip from New Orleans to Key West that you can see on the NAVSOURCE website. I also have seen blueprints and photos of what is labeled as the PT5 engine room interior and layout and it seems to have 3 engines. I will try to post it here.

It seems that I recall vaguely there was some issue with PT6 being delayed due to the inability of the Vimalert Engine Company of Jersey City NJ being able to supply these engines in a timely manner, and Higgins ended up installing at first Hall Scotts and later Packards in order to get through the delivery date requirements. I am a little fuzzy on the details. Maybe Al Ross or Randy Smith at the PT305 in New Orleans can amplify the information or correct me.
Hope this helps.
Jerry

Blueprint


Engine room interior either PT5 or PT6 Looking forward

Engine room interior from other end looking aft (Those are Hall Scott engines from reading the label on the end of the engine by the ladder rungs)


PT5 trip to FLA track chart


Detail close up of PT5 track chart of trip to FLA note inset photo of PT5



Vimalert engine side view


Vimalert engine other side


Vimalert engine end view


Jerry Gilmartin
PT658 Crewman
Portland OR

Total Posts: 1469 | Joined: Oct 8, 2006 - 11:16pm | IP Logged

Jeff D

Moderator
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Jeff D   Send Email To Jeff D Posted on: Jun 3, 2016 - 5:28am
Really interesting images Jerry, thank you for posting them.


Total Posts: 2200 | Joined: Dec 21, 2006 - 1:30am | IP Logged

Andy Small

MASTER
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Andy Small  Posted on: Jun 3, 2016 - 3:38pm
Wecome Olli!

The Board of Inspection and Survey report from 1945, after PT-5 was returned from her Canadian Crash Boat Service, reports the boat having two Packard 4M-2500, 1350 HP engines. These are listed as replacements for the original 3 Vimalert engines.

It also states the boat was in need of repairs due to this modification from all the rerouting and alterations of the original wiring and cables. Batteries ended up in improvised locations.

As an aside, the hull was reported to be strongly built, and the waterline reinforced with timber to combat ice conditions in the operating area.

Cheers,
Andy


Total Posts: 259 | Joined: Nov 20, 2013 - 9:04pm | IP Logged

Olli

New Member
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Olli  Posted on: Jun 5, 2016 - 4:05am
Thanks Jerry and Andy for comments and Jerry for magnificient photos. The Vimalert photos are probably from the factory set once handed over by the company but long since gone missing here. The two engineroom photographs are from Higgins 69 ft mtb type known as MRB 2-6. These are particulary informative. A good Vimalert PT 2 installation photo appears in Motorboating (January 1945, page 137).

Strahan's Andrew J. Higgins biography with lots of details especially on the Navy Departement administration and Higgins' sometimes difficult relations with it has been very valuable source in linking the Finnish involvement with the picture.

Both Vimalert and Packard were troubled in the beginning. Actually, a break down in test bench in February 1940 was the main cause for Finland not to buy PT 5. Packard 3M-2500 still gave problems in Britain.

As Andy noted, PT 5 and PT 6 were sturdy boats. They were well built and represened the high standard of workmanship and materials of Higgins Industries. Of the experimental PT boats PT 1-6 then available these two were regarded the best.

Olli



Total Posts: 2 | Joined: Jun 2, 2016 - 11:00pm | IP Logged

  Jerry Gilmartin

TOP BOSS
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Jerry Gilmartin   Send Email To Jerry Gilmartin Posted on: Jun 5, 2016 - 7:09pm
Hello Olli,
I forgot to mention that you may be able to locate more blueprints online if you go to the Louisiana Digital Library website http://louisdl.louislibraries.org/ and perform a search under the "Collection Name" menu, and type in "Higgins Industries" once you are in the Higgins Industries folder, you can open each scanned blueprint and several apply to the early PT5 and PT6 and MRB boats. It is a little tedious to search through them all. but you can find a lot of obscure drawings if you are persistent. I hope this helps.
Jerry

Jerry Gilmartin
PT658 Crewman
Portland OR

Total Posts: 1469 | Joined: Oct 8, 2006 - 11:16pm | IP Logged

Andy Small

MASTER
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Andy Small  Posted on: Jun 7, 2016 - 5:03am
I would like to follow up Jerry's post and highlight that drawing W-223 2410, in the collection, shows the recommend Higgins changes to the original specs for PT 5 and 6.

Drawing W-223 2410

The drawing (in my opinion) really captures the differences in hull construction techniques between the two main camps in PT Boat design within the US. The first from folks such as Prof George Crouch and the race boat world, and the other led by Higgins and later ELCO which is more of a mass production method. Both with their advantages and disadvantages that would become apparent over time.

I'm sure you are already aware, but I would like to add that PT 1 thru 4 were designed and built as a different type of boat from PT 5 and 6 (and PT 7 and 8) since they were to be small, lightweight boats that could be easily transportable. Having studied PT 3 in detail, you can see a direct lineage all the way back to the two WW1 motor torpedo boat proposals for a scout type vessel that led to the Greenport C270 and the Hickman C378. It was intended that these WW1 vessels would be lifted (fully loaded and manned) from vessels into the ocean to then engage or scout the enemy.

Also, just as important as PT Boat hull construction (and design) in my opinion, were the torpedo (and launching) design (and availability), engine development, and propeller (and rudder) design (what seems to be a continuous problem). Together with the ability to dance with the elephants (mainly ELCO), this helps put in context PT Boat development (again in my opinion).


Total Posts: 259 | Joined: Nov 20, 2013 - 9:04pm | IP Logged

Will Day

TOP BOSS
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Will Day   Send Email To Will Day Posted on: Jun 7, 2016 - 10:10pm
Insightful post, Andy...

Will

Total Posts: 1955 | Joined: Oct 8, 2006 - 4:19pm | IP Logged

alross2

TOP BOSS
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of alross2   Send Email To alross2 Posted on: Jun 8, 2016 - 4:12am
Quote:

Insightful post, Andy...

Will



Which is why I appreciate and enjoy this forum so much. Thanks for maintaining the integrity of the site, Dick... Oorah.

Al Ross



Total Posts: 993 | Joined: Oct 30, 2006 - 8:19pm | IP Logged

John Sullivan

Full Member
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of John Sullivan   Send Email To John Sullivan Posted on: Jun 8, 2016 - 5:00pm
HELLO JERRY was you inron 39 as i noticed the logo for ron 39 I was on the 107 boat and had just the2 eeks before it was accidentally sunkLoe man Sullivan ut the crew called kid and am now 93 years old. ole man sullivan


Total Posts: 46 | Joined: Oct 11, 2006 - 6:57pm | IP Logged

Next Page »

Pages: [1] 2


Lock Topic

 

Forum Legend

New Member

Reply to topic

More than 25 posts | Full Member

Reply to topic with quoted message

More than 50 posts | Advanced Member

Edit Message

More than 150 posts | MASTER

View profile

More than 300 posts | TOP BOSS

Email member