PT Boat Forum


Moderated by: Dick, Jeff D

The PT Boat Forum ª PT Boats of WWII ª  PT Boats - General

Next Page » | Page: 1 of 2

« Back to Topic Index Page 135 | Replies: 12 | Pages: [1] 2

 Author  Topic: PT-103 build
boater dave

New Member
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of boater dave  Posted on: Nov 18, 2011 - 12:15pm
Another simple build, using the Lindberg PT-109. I've had this boat for some time and want to get it off the shelf. I was looking for an early boat, and I liked the depth charges in the back in place of the aft tubes. But if there are any other early boats with an interesting history that someone could suggest I would switch. Not too long ago I started the mid war PT-196 using the Lindberg model. The same type of upgrades will be used here. Once winter sets in I can add the small details to both.
My first question to the experts here would be on the color scheme. In the PT Boats In Action booklet they mention that PT-103 was sporting the depth charges and that that was common for domestic duty. How common was it to have PT's here? Was it only for post construction testing before being shipped overseas? And what colors did they use here? The B&W photo looks like light and dark grey and being an early boat there wouldn't be any blues added. Am I going in the right direction?

Dave


PT-103, from the web


Overall layout.


My growing squadron


The holes getting patched up.


Outside faired.


Bridge modes and new tube mounts.


Four vents and a new hatch. The Lindy manholes covered up. Rudder access will be through the base of the 20mm.

Total Posts: 18 | Joined: Jan 6, 2011 - 4:40pm | IP Logged

TGConnelly

New Member
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message   Posted on: Nov 18, 2011 - 1:37pm
Your 196 should be two Greens and not Grays ... but other than that? Good builds ....




Total Posts: | Joined: Unregistered | IP Logged

Frank J Andruss Sr

TOP BOSS
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Frank J Andruss Sr   Send Email To Frank J Andruss Sr Posted on: Nov 18, 2011 - 1:44pm
Dave

I am pretty sure that the 103 class boats coming off the assembly line were painted overall, using No #5 Standard Navy Gray, with the deck No. #20 standard deck gray. In answer to your question, PT-103 did carry depth charges during her Time Trials in Newark Bay. It was not uncommon for the boats not to have all of their torpedoes in place while doing trials, but were added later, as sometimes supplies were limited. Elco even used dummy torpedoes to simulate the weights of the real ones while doing trials. Elco, by this time was well aware that the depth charges, used on earlier models did not pass the test for hunting submarines. However, they were used as effective measures against enemy destroyers that were chasing them, and many of the boats had them. If your model is depicting PT-103 as she was doing her first trails, than depth charges port and starboard is the way to go, but at some point the depth charges were removed and the torpedo tubes added.


Total Posts: 3497 | Joined: Oct 9, 2006 - 6:09am | IP Logged

Frank J Andruss Sr

TOP BOSS
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Frank J Andruss Sr   Send Email To Frank J Andruss Sr Posted on: Nov 18, 2011 - 11:04pm
Dave

I am also pretty certain that PT-103 kept those Depth Charges as far as Panama, and in fact could have had them even later, as I am not sure if she had the aft torpedo tubes added or not...........


Total Posts: 3497 | Joined: Oct 9, 2006 - 6:09am | IP Logged

alross2

TOP BOSS
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of alross2   Send Email To alross2 Posted on: Nov 20, 2011 - 11:06am
Quote:

Your 196 should be two Greens and not Grays ...



Not according to David Swasey, the ELCO camoufleur. In describing the scheme on 196, he writes ...Back of the face, we finished out the hull in dark and light gray wavey lines - a sort of quiet 'Adaptor System'.

Al Ross


Total Posts: 993 | Joined: Oct 30, 2006 - 8:19pm | IP Logged

Ed G

New Member
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Ed G  Posted on: Nov 20, 2011 - 11:45am
Hello everyone

I hope I am not hijacking this thread. I've been following this forum for quite a while and finally registered yesterday. I have a 38 inch fiberglass hulled PT 109 made by Fibo Craft (long out of business) that I purchased over 35 years ago. I have built model planes in years past but nothing like this kit. I am finally going to make time to do the build.

Being my first build I am a bit overwhelmed reading the plans. My sticking point right now is the crown of the deck. I have the deck frame in the hull but the kit plans are not clear for the crown of the deck. I have books by T. Garth Connelly, David Doyle and plans by Al Ross. I have enlarged the plans to reflect a 40 inch boat since components for that size are more readily available. With the enlarged plans it looks like there is a 3/16 (4 1/2 inch in real life) crown at the stern in the Al Ross plans. I am not sure if this dimension is carried the full length due to my plan reading (or lack thereof) skills. In the side view of the plans it appears that a crown is shown the full length but again, I am not sure.

Would you please give me some guidance on this topic?

Thank you
Ed


Total Posts: 3 | Joined: Nov 19, 2011 - 7:30am | IP Logged

boater dave

New Member
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of boater dave  Posted on: Nov 20, 2011 - 1:40pm
Ed, hijack away, as this very question has been lingering in my mind as I get ready for my 60" PT project. My hull came with a molded glass deck, but it is far too heavy. I was thinking of using plexi, but if I need to produce a compound curve I may have to panel the deck from several pieces, or strips.

Dave

Total Posts: 18 | Joined: Jan 6, 2011 - 4:40pm | IP Logged

alross2

TOP BOSS
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of alross2   Send Email To alross2 Posted on: Nov 20, 2011 - 3:36pm
Quote:

plan reading (or lack thereof) skills. In the side view of the plans it appears that a crown is shown the full length but again, I am not sure.




The camber (what you're calling a crown) runs the full length of the hull. The top line is the deck line along the centerline while the lower line is the deck at the sheer (side).

Al Ross


Total Posts: 993 | Joined: Oct 30, 2006 - 8:19pm | IP Logged

TGConnelly

New Member
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message   Posted on: Nov 20, 2011 - 4:01pm
Mr. Ross,

Please contact me offsite. Thank you.

I wish to discuss something with you.


Total Posts: | Joined: Unregistered | IP Logged

  Ed G

New Member
  

    
Post a Reply To This Topic    Reply With Quotes     Edit Message     View Profile of Ed G  Posted on: Nov 20, 2011 - 5:21pm
Thank you for the quick reply. That is a great help!!

Calling the camber the crown is just one of many things I will have to learn. I had originally typed back of the boat then corrected it to stern before posting so I would not sound like a complete duffus!

Take care everyone

Ed


Total Posts: 3 | Joined: Nov 19, 2011 - 7:30am | IP Logged

Next Page »

Pages: [1] 2


Lock Topic

 

Forum Legend

New Member

Reply to topic

More than 25 posts | Full Member

Reply to topic with quoted message

More than 50 posts | Advanced Member

Edit Message

More than 150 posts | MASTER

View profile

More than 300 posts | TOP BOSS

Email member